AK7P
Thin Set Tile Adhesive
- product data sheet
- download data sheet
Properties:
AK7P is a plastic-modified thin bed adhesive according to Standard EN 12004, for interior and exterior application. AK/P is simple to use, with a high initial bond and very good stability.
Areas Of Application:
AK7P is used as tile adhesive as a thin layer method for ceramic coatings, mosaic, clinker and brick tiles. We recommend AK7P for natural stone tiles as long as the specific properties of the natural stone are considered. AK7P is suitable for the sate tiling on surfaces according to DIN 18157 part 1, e.g. concrete, plaster, masonry, gypsum boards and heating screed.
AK7P is suitable as tile adhesive on construction boards from wood wool, gypsum boards, gypsum fibres and extruded polystyrene.
Storage:
In dry storage for up to 12 months, opened bags are to be used up immediately.
Technical Data:
- Basis: Sand/cement (polymer modified)
- Colour: Cement grey
- Filler structure: Fine sand
- Bulk density: 1.37 kg/l
- Application temperature: +5 °C up to +30 °C
- Pot life*: Approx. 2 hours
- Skin formation*: Approx. 20 minutes
- Traversable*: After approx. 24 hours After
- Walkable*: approx. 24 hours
- Cleaning: Immediately after use with water
- Consumption: Depending on surface and tiles, at least 2.0 kg/m2
- Packaging: 25 kg bag with PE inlet
Product Details
The surface has to be dry resp
The surface has to be dry resp., be of load bearing capacity, having no continious cracks and is to be free from dirt, dust and separating agents. Further information according to DIN 18157 part | is available and is to be adhered to.
Absorbing surfaces are to be prepared with ASO-Universal Primer. Smooth concrete surfaces have to be roughened, anhydrite screed has to be abraded and primed with ASO-Universal Primer.