Products >Tile & Natural Stone Laying >Tile Grout >HFO5-Brillantfuge

HFO5-Brillantfuge

High Strength, Flexible Cement-based Grout

Properties:

  • High strength, cement-based grout.
  • Fulfils the requirements of EN 13888, CG2.
  • Increased abrasion resistance.
  • Water repellent.
  • Resistant to freeze/thaw cycles.
  • Mould resistant.
  • Resistant to high pressure cleaning.
  • For interior, exterior and under water.
  • Polymer modified.
  • For joints from 3 – 20 mm wide.
  • Vapour permeable.
  • Good application and wash-off properties.
  • Suitable for floor and wall heating.
  • Colourways matched to the ESCOSIL2000 silicone system.

Areas of Application:

HFOS5-Brillanttuge is suitable for grouting fully vitrified, vitrified, brick tiles, tile slips, floor clinker etc. The strength of the tiles to be grouted must be greater than that of HFO5-Brillanttuge.

Storage:

Dry, 12 months in original unopened packaging. Use opened packaging immediately.

Technical Data:

  • Basis: cement, mineral aggregates, high quality additives and pigments
  • Colour: cement grey, mid grey
  • Surface/application temperature: +5° C to +25° C
  • Packaging: 25kg bags
  • Water demand: approx. 4.1 – 4.5 1/25 kg HFO5-Brillanttuge
  • Cleaning: with water in fresh state
  • Wet mortar density: approx. 2.1 kg/dm3
  • Pot life *): 30 – 60 minutes
  • Joint width: 3 to 20 mm
  • Trafficable*): after approx. 6 hours
  • Fully cured *): 7 days at the earliest
  • Compressive strength*): > 15 N/m2 according to DIN EN 12808-2
  • Flexural strength*): > 2.5 N/m2 according to DIN EN 12808-2

Product Details

Product Application:

Due to its high mechanical performance and abrasion

Due to its high mechanical performance and abrasion resistance, HFO5-Brillanttuge is especially suitable for grouting tiles in swimming pools, washing plants, commercial kitchens, sales rooms, commercial areas, industrial areas and workshops. Furthermore HFO5- Brillantfuge can be used on heated and flow screeds in bathrooms, showers and living rooms, on terraces, balconies and loggia as well as facades.

Product Usage:

HFO5-Brillantfuge can be used in heavy-duty areas

HFO5-Brillantfuge can be used in heavy-duty areas e.g. where cleaning equipment, high pressure steam cleaning or scouring vacuums are present. Furthermore the dense grout joints give increased resistance to cleaning chemicals. Neutral or alkaline cleaners can be used unrestricted. Compared to conventional cement: based grouts, HFO5-Brillantfuge has increased resistance to acidic cleaners.

Product is Suitable for Grouting Natural Stone:

HFO5-Brillanttuge is furthermore suitable for grouting natural stone

HFO5-Brillanttuge is furthermore suitable for grouting natural stone, should the specific product properties of the natural stone material permit it without discolouration/ picture framing e.g. via the stone’s components. We recommend CRISTALLFUGE for grouting natural stone. For grouting tiles in walls in living areas we recommend ASO-Fugenbunt.