Properties:

Flex-seal is designed for flexible sealing and waterproofing of expansion and construction joints subject to movement cracks. The TPE band material is fused into Polyester nonwoven fabric for greater strength and waterproofing capability.

Areas of Application:

Flexible waterproofing seal of expansion joints
subject to large amounts of movement in service.
Sealing expansion joints in prefabricated panels.
Sealing structural joints in facades.
Sealing joints in hydraulic works, such as
channels, basins, drains, pipework, etc.
Waterproofing exp

Storage:

24 months when stored cool and dry,
protected from sunlight and weather
influences in its
original packaging.

Technical Data:

Tape Dimentions : 120mm width x 50m length
Packaging : 50m or 10m per roll
Joint-Tape-Corners : From 65mm to 120mm
Pipe Sleeves : Internal angles: 12 cm wide
External angles: 12 cm wide

Technical Properties:

Basis : Non-woven laminated TEP tape.
Tape Dimensions : 120mm width x 50m length
Melt Index to GB/T-3682 : 30±5 g/10 min
Density to ASTMD-1505 : 0.5±0.02 g/cm3
Elongation to GB/T-1040 : >500%
Tensile Strength to GB/T-1040 : >1 MPa
Shore Hardness to ASTMD-2240 : 50±3 A
Shrinkage : <1%
Packaging : 50m or 10m per roll

Product Details

Product Application:

Joint waterproofing, wall and floor junctions and bay defining movement joints:
Using the waterproof coating i.e. Aquafin 2K/M, bond Flex-seal internal/external angles for use in corners, at the transition between wall and floor as
well as interface joints, to the prepared area without voids or folds. Pipe penetration on floor and wall can be sealed with the required Flex-seal
Pipe Sleeves sizes as per the fixing system

Flexseal Corner Patch